The trick to start the car if the smart key doesn't work

The new generation cars have "smart" keys, which, however, will run out of battery at some point. What happens in this case?

You pay a respectable amount to buy your new car. Along with this, of course, you also get the key, the basic accessory for unlocking and locking the doors, but also for starting the engine. Many new models, however, have so-called "smart" keys, which you don't even have to take out of your pocket.

The smart keys are designed in such a way that when the driver approaches the vehicle, the door unlocks by itself. Also, there is no classic socket for the starter, but a start/stop button, which you press and the engine starts.

With "smart" keys, everything is done automatically. Essentially, these are new generation remote controls, which operate with a battery. So at some point, the battery will discharge. The question is what happens then and if there is an alternative option.

So when the key battery dies, you obviously need to replace it. But at that moment, you don't have the time and you have to leave immediately for work. How are you? Next, very easy.

All manufacturers, in all smart key type keys, have installed a mechanical key inside the control that you hold in your hand. To remove it, simply press the lever on the main controller cover and pull it out. There is also a distinctive cap on the door handle, which you need to release. Then insert the key into the slot and open the door.

The solution is simple in this case as well. Put the mechanical key back in the case and place the remote close to the start/stop button. Many cars have the key symbol or lines drawn on the steering column, showing where it should touch.

As soon as the key is near there, the sensor "reads" it even if the battery is completely discharged and the engine starts normally. You can repeat this process continuously, but it is recommended to go as soon as possible to replace the battery.